| From | Message |
gtech
9/03/2010
12:35:05
|
 Subject: kyocera 4035
IP: Logged
Message:
When machine run out of toner ,user replaced it with a new one (OEM toner). Machine for a period it tries to load but , add toner, indication again. Can any body tell me where the problem is?
|
JAMULDOUG
9/03/2010
13:18:19
|  RE: kyocera 4035
IP: Logged
Message:
Is there tape or pull tab on toner?
|
Has Been
9/03/2010
16:46:11
| RE: kyocera 4035
IP: Logged
Message:
There is an engineering bulletin about raising the rear side of the cartridge platform for better mesh. Mark the cart gears with white-out to make sure they are turning.
|
Scott Casselman
9/06/2010
07:54:16
| RE: kyocera 4035
IP: Logged
Message:
has been is right .. also make sure the toner is for a 4035... the 3050/400/5050 toners will fit but not work
|
Jeff
9/13/2010
09:42:05
| RE: kyocera 4035
IP: Logged
Message:
Check Toner Motor!!
|
Jeff
9/13/2010
09:45:11
| RE: kyocera 4035
IP: Logged
Message:
I see this because looking at the post Machine run out of toner--did it or did the light come on because the toner motor failed? I always run 906 before looking elsewhere. Just my 2 cents
|
CB
10/04/2010
15:27:24
| RE: kyocera 4035
IP: Logged
Message:
The belt that drives the toner also runs the by-pass tray, the belt wears out and causes false add toners and by-pass jamming.
Just my $0.0199
|