| From | Message |
John
8/31/2010
14:36:58
|
 Subject: DI450 C0210
IP: Logged
Message:
I am trying to find out about a Minolta DI450, Code C0210. Book says to replace Transfer assembly. I have replaced it 3 times now, could it be the high voltage board or main board. I have also cleaned the corona socket. Or could there be something else i should look at.
Thank you for any help you can give me.
John
|
mincopier
8/31/2010
15:53:04
|  RE: DI450 C0210
IP: Logged
Message:
Could be the following:
Transfer assy
Charge assy
HV unit
Blocks that the Transfer sits in
I believe that about covers it.
|
Keith
9/01/2010
12:08:37
| RE: DI450 C0210
IP: Logged
Message:
These are sensitive to wall current drops. Check to make sure the power at the outlet is right & make sure there is nothing else on the same circuit that could be dropping the power down (shredder, fridge, microwave, etc.). Flip the circuit breaker to the copier outlet and anything else that goes off is on the same circuit.
You can't pour 20 ounces of water in a 15 ounce glass.
|