| From | Message |
Frank
9/01/2010
07:03:09
|
 Subject: Sharp Ar-336 intermittent power
IP: Logged
Message:
Machine will work for weeks then no power. When I went there I turned on machine and power came on so I didn't do anything. Customer called this morning saying machine did not power up.Frank
|
Copyman
9/01/2010
08:48:00
|  RE: Sharp Ar-336 intermittent power
IP: Logged
Message:
Could be as simple as the on/off switch starting to go bad. Most likely the power supply is failing. Good time for an upgrade!
|
Dom
9/01/2010
09:35:54
| RE: Sharp Ar-336 intermittent power
IP: Logged
Message:
Have had a bunch with bad solder joints on the DC pwb. Seperate board from holder. The parts that screw onto side of holder become loose. I think they are triacs.
|
Frank
9/01/2010
11:43:24
| RE: Sharp Ar-336 intermittent power
IP: Logged
Message:
Thanks guys. Frank
|
Brian
9/01/2010
14:53:19
| RE: Sharp Ar-336 intermittent power
IP: Logged
Message:
I have had power switches on this machine go bad that cause this issue as well like said before.
|
Frank
9/01/2010
14:58:15
| RE: Sharp Ar-336 intermittent power
IP: Logged
Message:
I'll order a power switch and change it and take it from there. Thanks again Brian. Frank
|
Frank
11/05/2010
14:20:39
| RE: Sharp Ar-336 intermittent power
IP: Logged
Message:
Power switch didn't do the trick. I ordered a board exchange with Hytec and that should do it.Frank
|