| From | Message |
jtechie
9/01/2010
12:57:25
|
 Subject: ricoh aficio 1035p
IP: Logged
Message:
Customer called about a black stripe on prints. I diagnose it to be a bad transfer belt. Customer wants the drum assembly done at the same time. I replaced the drum, cleaning blade, charge roller, transfer belt and cleaning blade.
Now my pages are solid black. I went through everything again and rebuilt them with the same results.
Do I have a bad charge roller or is there something else I should be looking at? ie...ground?
Thanks for any help.
Jeff
|
Venom
9/01/2010
16:25:51
| RE: ricoh aficio 1035p
IP: Logged
Message:
Wipe off the charge roller and check that the leaf spring contacts are good....yes it is main charge related
|
Mark B.
9/02/2010
04:01:49
| RE: ricoh aficio 1035p
IP: Logged
Message:
Indeed, no charge. The little metal lip on the rear of the pcu (which make contact with chassis) is bent or broken?
|
jtechie
9/02/2010
05:35:35
| RE: ricoh aficio 1035p
IP: Logged
Message:
I saw that the tip was indeed bent. Pulled it out and now the prints are perfect.
Thanks for the help.
Jeff
|