| From | Message |
Frank
9/01/2010
14:36:58
|
 Subject: Panasonic 7718 has e2-01 code
IP: Logged
Message:
Some kind of bypass code. I can use bypass when selected but if switch to front casette the e2-01 code flashes. As soon as I select bypass e2-01 disappears and bypass is ready to feed. There was a little straw in bypaas which I had removed and all looks okay. Frank/ActionPhotocopy
|
Marc
9/01/2010
16:39:52
|  RE: Panasonic 7718 has e2-01 code
IP: Logged
Message:
I believe E2-01 is a tray lift malfunction. Either you have a piece of paper behind the paper tray, or your tray lift motor assembly has broken. It happens a lot when the customers put short paper in a tray set up for large paper. If there's paper behind tray 1, it might be time for new feed rollers, might be a good idea to check them.
Good Luck
|
Frank
9/01/2010
16:52:02
| RE: Panasonic 7718 has e2-01 code
IP: Logged
Message:
Thanks a lot Marc. frank
|
Marc
9/01/2010
17:15:58
| RE: Panasonic 7718 has e2-01 code
IP: Logged
Message:
I think I saw your post on technet, I recently registered, but for some reason they're not sending me an email for validation, so I can't post there yet.
Glad to be of service.
|