| From | Message |
Kristina
8/27/2010
12:14:24
|
 Subject: Brother HL 1270
IP: Logged
Message:
Is there a re-set for the fuser that I may try before replacing it? Prolly a silly question, but thanx in advance for the help...I just don't have manuals for brother, cuz I don't have enough of them in my territory.
|
Jim
8/28/2010
05:29:06
| RE: Brother HL 1270
IP: Logged
Message:
Cristina
From the manual.
Note
this problem will be cleared if leaving the printerON for ten minutes. ?
If the heater is cooled down sufficiently, this problem may be cleared by turning on the printer power switch while pressing the panel button.
BE WARNED, HOWEVER, THAT THIS OPERATION WILL MELT THE FIXING UNIT IF THE HEATER IS HOT.
good luck
Jim
|
Als
8/30/2010
09:15:59
| RE: Brother HL 1270
IP: Logged
Message:
What error indication did you get in the first place?
Problem with print quality?
Als
|
kristina
9/03/2010
09:15:42
| RE: Brother HL 1270
IP: Logged
Message:
not sure what started it but the LED s indicate that the fuser is at fault. I will check some items before trying thepanel re-set. Thank you.
|
Kristina
10/01/2010
00:43:23
| RE: Brother HL 1270
IP: Logged
Message:
Thank you, the re-set did it. I just took the fuser out and cleaned the thermostor and rollers, greased, and put it back together, then did the re-set. It's been workin like a charm sinse. Gratis.
|