| From | Message |
auburnbusinesssystem
9/01/2010
07:19:53
|
 Subject: hp 4250 error 11.01
IP: Logged
Message:
getting this error evey time the printer is started. panel says "bad locpd 4485 11.01 internal clock error". have never had this before. looking in the service manaul but could not find it. anyone had this before? thanks howard
|
Desert Tech
9/01/2010
07:24:02
|  RE: hp 4250 error 11.01
IP: Logged
Message:
Yes, on one machine. Apparently [at least with mine] the unit once had a hard disk installed that was removed. The error only shows up when the machine is powered off and on. You can either enter date & time or just press the check button to finish booting. Solution is to replace the formatter but unless it is an issue to the customer it isn't worth the expense.
|
Desert Tech
9/01/2010
07:29:05
| RE: hp 4250 error 11.01
IP: Logged
Message:
PS - the battery is not holding a charge. You can try replacing the battery on the formatter if you want to take the risk, but it's best to just replace the formatter.
|
i3fusionguy
9/01/2010
19:35:49
| RE: hp 4250 error 11.01
IP: Logged
Message:
I've got some cr2032s with pre-tinned leads already - saved a few PCs and formatters this way!
|
tonerjockey
9/02/2010
00:55:05
| RE: hp 4250 error 11.01
IP: Logged
Message:
is there an explosion risk to pretinning the disk type batteries ourselves? just wondering. i did a battery once but cant remember what type. no explosion but i still cringe thinking about it. jim
|
i3fusionguy
9/02/2010
19:05:07
| RE: hp 4250 error 11.01
IP: Logged
Message:
Not sure, I get the type with leads already soldered on from factory. You could save yourself the effort and get a mounting clip for a buck from electronics shop or radio shack.
|
carlos
9/04/2010
09:09:17
| RE: hp 4250 error 11.01
IP: Logged
Message:
ive soldered a lot of ni-cad, lithiums and never had any booms yet. but i cant guarantee that it can not happen. just wear goggles.
|