| From | Message |
rick
9/03/2010
13:59:39
|
 Subject: laserjet 4250
IP: Logged
Message:
I have a strange one in the shop today. after opening the drawer The lift motor does not lift until it tries to feed paper. Then it will run normal. Tried new motor and switches. Any ideas?
TIA
Rick
|
JIM
9/29/2010
08:58:43
| RE: laserjet 4250
IP: Logged
Message:
HAD SAME PROBLE, FOUND IT WAS THE REGISTRATION CLUTCH AND ASSY, WOULD ALOS JAM SOMETIMES COMING OUT THE TOP EXIT. CLUTCH WAS STICKING AND NOT RELEASING.....REG ASSY SITS BEHIND THE TRAY ONE (BYPASS) AREA....HOPE THIS HELPS
|
|
|