Typewriter Techs [ return ] From Message copiertech1377   7/14/2010 11:16:43 Subject: sears 161.53030 IP: Logged Message: I was working in this one with a ribbon feed problem when all of a sudden, it blew fuse number 202 and would do nothing but hum. I replaced the blown fuse and it it still doing nothing but humming. Is there a reset procedure that needs to be done after replacing the fuse ? Old Guy   7/15/2010 15:25:38 RE: sears 161.53030 IP: Logged Message: First of all, you need to know who made the machine. It could be a Nakajima, Brother or Smith Corona. You can get an idea by which ribbon it takes. If a fuse blows on replacement something is shorted. Motor or board most likely. Bet there are no parts available, you may have to get parts off another machine to fix it. I know this info. is vague, but its the best I can do. Hope you have an understanding customer. Good Luck P 1

(C) Smarka Inc. All rights reserved.