Fax/Printer Tip Archives
For more current information, use the Bulletin Boards.

720/740/760
Problem: Fuser exit roller nubs wear down. To fix the problem you could buy a new fuser!!!but this is costly.
Solution: Go down to the local hardware store and buy three O rings to slip on to the exit roller since you can’t order the exit roller by itself. This will save 95% on the cost of repair.

810L
The Konica 810L crosses over to the Murata F-75. If this machine askes for
toner after adding a cartridge of toner, check to see if you replaced the
waste toner bottle on the side of machine. Changing the waste toner bottle
is what make the machine think you have added toner.

© Copyright 1995 - 2002 Smarka Inc. All rights reserved.